To effectively troubleshoot a problem, it is important to determine the cause of its occurrence. The control system has a self-diagnosis function - errors of the Virpul refrigerator are displayed on the display with special codes. After deciphering them, you can quickly find the place of the malfunction and fix it with your own hands.
Whirlpool Error Codes
The refrigerator worked properly, but suddenly you noticed a malfunction code on the screen? Before starting to search for the causes, reboot the equipment:
- Unplug the refrigerator.
- Wait 10-15 minutes.
- Plug in.
If nothing has changed and the symbols are lit on the scoreboard, look for their meaning in our table.
Message on display | What does it mean | How to fix the problem yourself |
AL 01. The “Service call” lamp blinks on the refrigerator display. | The NTC temperature sensor in the refrigerator compartment does not work. |
|
AL 02. The same indicator flashes (see AL 01). | There is no connection with the air valve. | What should be done:
|
AL 03. The same indicator blinks, only on the freezer display. | The NTC sensor is defective in the freezer. | To correct the problem, see the steps for AL 01. |
Glows CF. An additional beep sounds. | Connections between the electronic module and the control panel (interface) are broken. | Inspection and repair of wiring. Installing a new interface or module. |
The “-” value flashes on the freezer compartment display. A beep is heard. | Temperature rise in the chamber (more than 9 degrees). | What to do:
|
The number 15 blinks (or smaller numbers). A signal sounds. | Problems with voltage supply. | Press the plug firmly into the outlet. Inspect the network cable for continuity. Wait, maybe the feed will resume soon. |
A light flashes on the panel. A warning sound sounds: the camera door is open. | The temperature in the compartment increased. | Actions:
|
The interface does not work. | There is no power supply. The contacts between the interface and the board are broken. | Replacing a defective element, checking contacts. |
Did you notice a trouble code? Do not delay the repair. Search for reasons yourself or consult a specialist.